产品分类MORE>>
联系我们
联系我们
联系人：燕先生
电 话：021-59921399
手机号：15618766740
地 址：上海市嘉定区安亭镇新源路155弄16号
  上海激光打标机维修之激光扩束镜原理>>您当前位置：上海亮实激光官网 > 公司新闻 >

上海激光打标机维修之激光扩束镜原理

上海激光打标机维修之激光扩束镜原理：
 激光扩束镜原理，上海亮实激光，激光打标机配件，激光切割机配件，激光焊接机配件，激光配件，激光设备配件专业供应商。咨询QQ：283411460，电话15618766740.

The most common type of beam expander is derived from the Galilean telescope which usually has one negative input lens and one positive output lens, as shown in Figure 1. The input lens presents a virtual beam focus at the output. For low expansion ratios (1.3-20´), the Galilean telescope is most often employed due to its simplicity, small package size, and low cost.

扩束镜

Figure 1: Diagram of a beam expander

As shown in Figure 1, the lens M3 focuses the laser beam onto the front focus plane and the new beam waist w¢0 and divergence angle q¢ can be represented as

                                                         (1)
and

                                                              (2)

                                       (3)

where w(l) is the radius of the beam entering the lens M3, l is the distance between the lens M3 and the beam waist w0 from the laser generator, and f3 is the focal length of the lens M3.

 
Since w0¢ lies on the back focus plane of the lens M4 with a longer focal length, f4, the Gaussian beam with a beam waist w¢0 will be collimated by the beam expander. The collimation ratio of the beam expander for a Gaussian beam is as follows

                (4)

where T1 = f4/f3. The beam waist w²0 and divergence angle q² after the beam expander are

                          (5)

and

 

 

                               (6)

Substituting Equation (1) into Equation (5), the following expression can be obtained

                            (7)

From Equations (4)-(7), it is concluded that the beam expansion ratio and the collimation ratio for a Gaussian beam depend not only on the specifications of the beam expander, but also on the laser beam parameters as well as the positions of the optical lenses.
 
The function of a beam expander is to reduce the divergence angle of laser beams and thus make the focused beam diameter smaller.

以上内容由上海激光打标机维修团队整理供稿！


 




上一篇：YAG50瓦激光打标机故障排除办法
下一篇：上海激光打标机维修之聚焦镜的原理

相关推荐